 |
 |
|
 |
 |
|
 |
|
 |
Gasket Materials:
Click here to look at the Gasket Help Page
Although we are able to supply a vast array of gasket materials covering almost any type of sealing property, below we have compiled a list of the most commonly used gasket sealing materials. This list is designed to provide a full range of sealing capabilities, particularly in the automotive industry.
You will see that each specific material property is listed below, thus enabling you to determine which one is most suitable for your application.
If unsure, please feel free to contact us with your specific application requirements, and we will be happy to advise you on which one best suits your needs. We also stock materials suitable for use where high pressure or chemical contact is an issue.
For all your sealing needs just contact us with your application requirements, and one of our experienced team will be able to advise you on which material is best suited to your exact needs.
The material sheet sizes listed below have been developed over a period of time, and have proved to be the sizes most practical for the end user, in both small and large jobs.
We are able to offer larger sheets if required. Once again, just contact us with your requirement and we will do our best to help.
Gasket Material Properties
General Purpose Oil Resistant Paper
A low cost resilient gasket material suitable for temperatures up to 120 degrees centigrade.
Material has poor dimensional stability if stored over long periods of time.
Available in thicknesses 0.25mm(0.010"), 0.4mm(1/64"), 0.8mm(1/32"), 1.0mm, 1.5mm(1/16").
Beater Jointing with Anti-Stick Coating
A medium priced, good quality, dimensionally stable, gasket material with good resistance to oils, fuels and water/glycol, for temperatures up to 140 degrees centigrade.
Material has a PTFE dispersion coating that facilitates clean and easy replacement of old gaskets.
Available in thicknesses 0.4mm(1/64"), 0.8mm(1/32"), 1.15mm, 1.5mm(1/16").
Controlled Swell Beater Jointing
A good quality cellulose based gasket material with good resistance to oils, fuels and water/glycol for temperatures up to 140 degrees centigrade.
Controlled swell characteristics make this material ideally suited for use on older, distorted flanges or where bolt load is low.
Available in thicknesses 0.4mm(1/64"), 0.5mm, 0.8mm(1/32"), 1.0mm.
Nitrile Bonded Cork
Oil and fuel resistant granulated cork bonded in nitrile rubber.
Suitable for use where a soft gasket is required in applications up to 120 degrees centigrade. Available in 2,3,4,5 & 6mm.
High Temperature Manifold Grades
Highly stable temperature resistant steel and fibre laminates for use in manifold, exhaust joint and other similar applications.
Use the HE11, fibre faced material, for inlet manifold and other less strenuous applications.
Use SFSM, steel faced, for exhaust manifolds and joints.
Usually supplied in thicknesses between 1.2 & 1.6mm but thicker is available if required.
Please note all prices below are plus p&p. For information on postage and payment please visit our POSTAGE link above.
| Stock Code | Item | Price |
| General Purpose Oil Resistant Paper Gasket Material | ||
| 25OPS | 0.25mm(0.010") 255x480mm | £1.00 |
| 25OPL | 0.25mm(0.010") 500x1000mm | £4.00 |
| 4OPS | 0.4mm(1/64") 255x480mm | £1.00 |
| 4OPL | 0.4mm(1/64") 500x1000mm | £4.00 |
| 8OPS | 0.8mm(1/32") 255x480mm | £1.00 |
| 8OPL | 0.8mm(1/32") 500x1000mm | £4.00 |
| 10OPS | 1.0mm 255x480mm | £1.00 |
| 10OPL | 1.0mm 500x1000mm | £4.00 |
| 15OPS | 1.5mm(1/16") 255x480mm | £1.50 |
| 15OPL | 1.5mm(1/16") 500x1000mm | £6.00 |
| Beater Jointing with Anti-Stick Coating Gasket Material | ||
| 4N8S | 0.4mm(1/64") 255x480mm | £1.00 |
| 4N8L | 0.4mm(1/64") 500x1000mm | £4.00 |
| 8N8S | 0.8mm(1/32") 255x480mm | £1.00 |
| 8N8L | 0.8mm(1/32") 500x1000mm | £4.00 |
| 12N8S | 1.15mm 255x480mm | £1.50 |
| 12N8S | 1.15mm 500x1000mm | £6.00 |
| 15N8S | 1.5mm(1/16") 255x480mm | £2.00 |
| 15N8L | 1.5mm(1/16") 500x1000mm | £8.00 |
| Controlled Swell Beater Jointing Gasket Material | ||
| 4BFS | 0.4mm(1/64") 255x480mm | £1.00 |
| 4BFL | 0.4mm(1/64") 500x1000mm | £4.00 |
| 8BFS | 0.8mm(1/32") 255x480mm | £1.00 |
| 8BFL | 0.8mm(1/32") 500x1000mm | £4.00 |
| 10BFS | 1.0mm 255x480mm | £1.50 |
| 10BFL | 1.0mm 500x1000mm | £6.00 |
| Nitrile Bonded Cork Gasket Material | ||
| 2NCS | 2mm 255x480mm | £1.00 |
| 2NCL | 2mm 500x1000mm | £4.00 |
| 3NCS | 3mm 255x480mm | £1.50 |
| 3NCL | 3mm 500x1000mm | £6.00 |
| 4NCS | 4mm 255x480mm | £2.00 |
| 4NCL | 4mm 500x1000mm | £8.00 |
| 5NCS | 5mm 255x480mm | £2.50 |
| 5NCL | 5mm 500x1000mm | £10.00 |
| 6NCS | 6mm 255x480mm | £3.00 |
| 6NCL | 6mm 500x1000mm | £12.00 |
| High Temperature Manifold Grade, HE11 Gasket Material | ||
| HE11S | 1.2-1.6mm 255x480mm | £3.50 |
| High Temperature Manifold Grade, SFSM Gasket Material | ||
| SFSMS | 1.2-1.6mm 255x480mm | £5.00 |
Click Here to View Gaskets Direct Limited Products
ebay
All products advertised on ebay
are also available directly from this website
If you require more detailed information about gasket types:
Click here to go to the Gaskets Help and Info Page
Gaskets Direct Limited are Manufacturers and Suppliers of
Automotive and Agricultural Gaskets:
Jaguar Series 1 E-Type gaskets
Jaguar Series 2 E-Type gaskets
Jaguar Series 3 E-Type gaskets
Gaskets for universal use in classic cars, vintage cars, vintage motorcycles, vintage classic commercial vehicles and vintage steam engine applications, such as traction engines, steam rollers, steam locomotives and stationary steam engines.